Now showing items 1-20 of 53

    • Mechanical Behavior of Cement Stabilized Rammed Earth (CSRE) Wall Under Axial load for earth building 

      สำเนียง องสุพันธ์กุล; วราธร แก้วแสง; สาโรจน์ ดำรงศีล (มหาวิทยาลัยเทคโนโลยีราชมงคลรัตนโกสินทร์, มหาวิทยาลัยเอเชียอาคเนย์, 2016)
      This paper aims to investigate the mechanical behavior under axial load of cement Stabilized Rammed Earth (CSRE) wall with steel reinforcement varied slenderness wall. Lateritic was used for the study by being mixed with ...
    • The Study of Properties of Application Hollow Concrete Blocks 

      เทอดศักดิ์ สายสุทธิ์ (มหาวิทยาลัยเอเชียอาคเนย์, 2016)
      This research is to study the properties of Application Hollow Concrete Blocks (AHCB) To determine the ultimate compressive strength and the water absorption compared to Thai Industrial Standard (TIS. 57-2533) and to find ...
    • คุณสมบัติทางวิศวกรรมของก้อนอิฐดินดิบผสมใบกล้วยและขุยมะพร้าว 

      ชูศักดิ์ คีรีรัตน์; ปิยะพงศ์ กี่สวัสดิ์คอน (คณะวิศวกรรมศาสตร์ มหาวิทยาลัยเทคโนโลยีราชมงคลรัตนโกสินทร์ วิทยาเขตวังไกลกังวล, 2016)
      The purpose of this research is to study engineering properties of adobe bricks mixed with agricultural materials (banana leaves fiber and coir). The engineering properties which are tested in this study are compressive ...
    • Development of natural dyed cotton biocomposites for environmental friendly decorative materials 

      ปาเจรา พัฒนถาบุตร; ญานิสา คงอิ่ม; ณัฐนรี มีเสน; ลักษิกา เรือนแก้ว (คณะวิศวกรรมศาสตร์และเทคโนโลยีอุตสาหกรรม มหาวิทยาลัยศิลปากร วิทยาเขตพระราชวังสนามจันทร์, 2016)
      This research aimed to develop decorative materials from natural dyed cotton/polylactic acid (PLA) biocomposites. Natural dye used in this research was extracted from Sappan wood and 3-Aminopropyl triethoxysilane (APTES) ...
    • A Study of the Property of Lightweight Concrete Block made of Expanded Clay Pellets and Fly Ash. 

      สำเนียง องสุพันธ์กุล; วราธร แก้วแสง; จิรัฐิติ์ บรรจงศิริ (คณะวิศวกรรมศาสตร์ มหาวิทยาลัยเทคโนโลยีราชมงคลรัตนโกสินทร์, สาขาวิชาวิศวกรรมโยธา คณะวิศวกรรมศาสตร์ มหาวิทยาลัยเอเชียอาคเนย์, 2016)
      The research aims to study the property of lightweight concrete block made from expanded clay pellets and fly ash by focusing on the mortar’s compression test to the various mixing of fly ash and cement. The results showed ...
    • Processability Study of Natural Rubber Foam for Insulation Material in Building. 

      ชัชวาล วงศ์แสง; วัชระ สุวรรณรัตน์; Kiyoaki Ishimoto; พิมลพรรณ เนียมหลาง; สุมนมาลย์ เนียมหลาง (คณะวิศวกรรมศาสตร์ มหาวิทยาลัยเทคโนโลยีราชมงคลธัญบุรี, คณะวิศวกรรมศาสตร์ มหาวิทยาลัยเทคโนโลยีราชมงคลรัตนโกสินทร์, 2016)
      The processability study of natural rubber foam for insulation material in building was investigated. Recently, the synthetic rubber e.g. polyurethane (PU) plays the important role in insulation material but its limitation ...
    • ปริมาณเถ้าแกลบดำที่เหมาะสมสำหรับงานคอนกรีตโครงสร้างทั่วไป 

      พิทยา สุขจินดา; กฤตธี น้ำกลั่น; ธนาคาร พรหมมณี; ณัทพงษ์ ชัยวิชิต (สาขาวิศวกรรมโยธา คณะวิศวกรรมศาสตร์ มหาวิทยาลัยเทคโนโลยีราชมงคลรัตนโกสินทร์, 2016)
      The objective of this research is to investigate the compressive strength of the concrete containing black rice husk ash for structural concrete work. The studied parameter was the replacement percentages of cement by black ...
    • Product Design from Palmyra palm for the building decoration: Satingpra District, Songkhla province. 

      เจนจิรา ขุนทอง; มัลลิกา ปู่เพ็ชร์ (คณะสถาปัตยกรรมศาสตร์ มหาวิทยาลัยเทคโนโลยีราชมงคลศรีวิชัย สงขลา, 2016)
      The objective of this research was (1) to develop the workpiece which made from Palmyra palm product in Sathingphra district of Songkhla (2) to develop the pattern of Palmyra palm product by the community involvement ...
    • A study of properties of asphalt concrete containing old concrete 

      อาทร ชูพลสัตย์; ณรงค์ กุหลาบ; ณิชาภา มินาบูลย์ (คณะวิศวกรรมศาสตร์, คณะสถาปัตยกรรมศาสตร์และการออกแบบ มหาวิทยาลัยเทคโนโลยีราชมงคลรัตนโกสินทร์, 2016)
      The reseach was made for the purpose to study in the qualification of new asphalt concrete by using old concrete to be in the part of one component. We research on the issue whether it is suitable and get along with road ...
    • A Study for the improve drainage of the Porous concrete flooring stone wash 

      อาทร ชูพลสัตย์; ณรงค์ กุหลาบ; ณิชาภา มินาบูลย์ (คณะวิศวกรรมศาสตร์, คณะสถาปัตยกรรมศาสตร์และการออกแบบ มหาวิทยาลัยเทคโนโลยีราชมงคลรัตนโกสินทร์, 2016)
      The purpose of this research was to study the engineering properties of concrete flooring, stone wash porosity variations in the nature and magnitude of the flexural strength, water absorption. The temperature at the surface ...
    • a study and invention of a concrete cube making equipment by the philosophy of sufficiency economy 

      เอกรัฐ ธีรวนบดี; ยุทธพงษ์ บุญยัง (คณะสถาปัตยกรรมศาสตร์และการออกแบบ มหาวิทยาลัยเทคโนโลยีราชมงคลรัตนโกสินทร์, 2016)
      The device creates a mortar cube from the Philosophy of Sufficiency Economy. The aims of the study is to create a tool for making a mortar cube to be easy to use , save the environment and can actually work. This device ...
    • A Case Study crane hydraulics lever applied to a model in wrought iron 

      หัทยา แสงสว่าง; ณภัทร แก้วสุโพธิ์ (คณะสถาปัตยกรรมศาสตร์และการออกแบบ มหาวิทยาลัยเทคโนโลยีราชมงคลรัตนโกสินทร์, 2016)
      A case study of the using hydraulic jack lever adapted to be a prototype in steel blending. The aims of the study is to be consistent with the purpose of building a replacement for the old ways of working. The user group ...
    • Effect of silane coupling agent on weathering properties of wood-PLA composites for building decorative materials 

      ณฐวัฒน์ กาญจนวลีกุล; ชัญญานุช จอมศรี; ศศิธร ทองชนะ; ปาเจรา พัฒนถาบุตร (คณะวิศวกรรมศาสตร์และเทคโนโลยีอุตสาหกรรม มหาวิทยาลัยศิลปากร วิทยาเขตพระราชวังสนามจันทร์, 2016)
      The objectives of this research is to examine the effect of 3-aminopropyl triethoxysilane (APTES) coupling agent content on physical, thermal and mechanical properties of wood-PLA composites after weathering test under 120 ...
    • Three-dimensional measuring equipment, technology, inventions and vertical angle measurements. The philosophy of Sufficiency Economy 

      คณพล จินดามรกฎ; จิตรกร ชอบธรรม (สาขาวิชาการจัดการงานก่อสร้าง คณะสถาปัตยกรรมศาสตร์ มหาวิทยาลัยเทคโนโลยีราชมงคลรัตนโกสินทร์, 2016)
      This research is the application of laser and ultra- sonic frequency .By using the Arduino programming to measure a distance . To be used in the development of measurement to determine the level of precision and reduces ...
    • The Development of Ordinary Portland Cement – Epoxy Resin For Building Construction Applications 

      บวรกิตติ์ เนคมานุรักษ์; จุฬารัตน์ เอี่ยมสมัย; ภัทร์ สุขแสน (สาขาวิชาวิศวกรรมวัสดุ คณะวิศวกรรมศาสตร์ มหาวิทยาลัยเทคโนโลยีราชมงคลรัตนโกสินทร์, ภาควิชาวิทยาการและวิศวกรรมวัสดุ คณะวิศวกรรมศาสตร์และเทคโนโลยีอุตสาหกรรม มหาวิทยาลัยศิลปากร, 2016)
      Portland cement is a very important material in building construction however it possesses limitations in some applications. Thus, the use of polymeric materials would give an important role in increasing the efficiency ...
    • Vertical Garden for Heat Reduction in the Building 

      จุฬาลักษณ์ ไพบูลย์ฟุ้งเฟื่อง; กฤชกนก สุทัศน์ ณ อยุธยา; พรชัย จิตติวสุรัตน์; ชัชชติภัช เดชจิรมณี; พรชัย ขันทะวงค์ (1คณะสถาปัตยกรรมศาสตร์และการออกแบบ, วิทยาลัยนวัตกรรมการจัดการ มหาวิทยาลัยเทคโนโลยีราชมงคลรัตนโกสินทร์, 2016)
      The study was aimed to develop the systems of vertical gardens for reduce indoor heat and decorating of the building. This research are study 3 systems were designed. In the first designed, it was moveable. The second ...
    • Development of lightweight concretes using agricultural by-products 

      ภัทร์ สุขแสน; พัชราภรณ์ สาธุการ; ณัฐ คุณชมภู; ดวงกมล แซ่ตั้ง (คณะวิศวกรรมศาสตร์และเทคโนโลยีอุตสาหกรรม มหาวิทยาลัยศิลปากร วิทยาเขตพระราชวังสนามจันทร์, 2016)
      Agricultural wastes; rice straw and coconut coir fiber, which are found in large quantity in Thailand, were utilized as main materials for reinforcing concretes and making concretes lighter than cement mortar 25-40%. The ...
    • Compressive Strength and Electrical Resistivity Development of Cement Mortars Containing Silica Fume and Fly Ash 

      ธเนศ ทายะบวร; มงคล นามลักษณ์ (คณะครุศาสตร์อุตสาหกรรมและเทคโนโลยี มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าธนบุรี, 2016)
      The main aim of this research was to study the development of engineering properties and electrical resistivity of ternary blended cement mortars containing Portland cement, silica fume, and fly ash. Test results showed ...
    • ยูนิเวอร์ซัลเฟอร์นิเจอร์ดีไซน์ที่ใช้ในสำนักงานเพื่อเป็นต้นแบบของผู้พิการ โดยใช้หลักกำรลำดับชั้นเชิงวิเคราะห์เพื่อช่วยในการตัดสิน 

      โสรัจ พฤฒิโกมล; บุณย์ชนะ ภู่ระหงษ์ (คณะสถาปัตยกรรมศาสตร์และการออกแบบ มหาวิทยาลัยเทคโนโลยีราชมงคลรัตนโกสินทร์, คณะวิศวกรรมศาสตร์ สถาบันเทคโนโลยีพระจอมเกล้าเจ้าคุณทหารลาดกระบัง, 2016)
      This research was conducted with these three objectives: 1) to study and develop a model of office furniture design for various types of the disabled, including being without legs, blind, or deaf; 2) to create unique designs ...
    • The production of Brick block for the Acoustics Absorption Wall by mixing Cement’s Bags and Concrete 

      จุฬาลักษณ์ ไพบูลย์ฟุ้งเฟื่อง; ชัชชติภัช เดชจิรมณี; พรชัย ขันทะวงค์ (คณะสถาปัตยกรรมศาสตร์และการออกแบบ, วิทยาลัยนวัตกรรมการจัดการ มหาวิทยาลัยเทคโนโลยีราชมงคลรัตนโกสินทร์, 2016)
      Urban noise pollution, in the present, has rapidly grown to be the most serious problem of our society. The study is to the noise absorption efficiency the Cement’s Bags materials mixed with concrete. Three variables; ...